3840*1920 4MP 30FPS usb 3.0 type-c Synchronize with the frame Binocular Camera Module

Description: Module No. RYS2EYE-USB3.0-C-1080P Module Size 94*28MM Lens center spacing 60MM Temperature (Operation) -20°C to 65°C Pickup function NO Double color is not required by default,RGB+B/W can（LED 850) Optional 850 infrared lamp board Assembly technique SMT (ROSH) Object distance 30CM-20000cm PCB printing ink Sinking gold and dumb black Focus mode Focus manually interface USB 3.0-C / USB 2.0-4PIN2.0 Power USB bus power 5V Working current ＜250mA Operating system request Windows Linux andios IOS (Drivers standard） UVC driver free international standard Certifications ROSH Electronic shutter mode） Rolling shutter GPIO Control interface Keep 3 set. One of the sets is used to hardware trigger the camera, pixel 2.6MP Left and right lens out of the image time difference Synchronized with the frame, the theory is 0 seconds,Actually affected by the transmission, there is a slight time difference Selectable lenses From a field of view of 15 degrees to 210 degrees Sensor Type 1/2.7” AR0230 Active Array Size 3840*1080 Sensitivity 4.0 V/lux-sec Pixel Size 3.75µm x 3.75µm Maximum Image Transfer Rate 3840*1080 S/N Ratio 41db Dynamic Range 120db HDR Lens Type (default) TTL 17.5MM F/No 2.7MM bFL 2.8MM mm FOV（D） 默认D:100°，H：85° TV Distortion <1% Optical Distortion <1% IR Filter 650±10nm DSP Type (White balance、exposure) Auto Output Formats In usb 3.0 state, output in YUY2 format. In the USB2.0 state, it automatically switches to MJPEG format。 3840*1080：30FPS 2560*960：30FPS 2560*720： 30FPS 1280*480 Fixed Pattern Noise < 0.03% of VPEAK-TO-PEAK Special tips The default assembly method is RGB+RGB, and it is not equipped with a light board. If you want to make an infrared effect, you need to indicate the lamp board Take an image of the object, RGB+RGB or RGB+B/W or B/W+B/W